Join the 155,000+ IMP followers

13  '20
Written on
FAULHABER GROUP

A lot of power in a very small space

Drive Systems evolved. Generally speaking, electric motors are not "lone wolves" but for most applications need to be combined with gearheads for speed reduction as well as encoders. To ensure that the components are perfectly matched to each other and to minimise installation requirements, it is recommended to obtain the individual components as a complete solution from a single source. Even in cases where installation space is extremely tight and where high-torque drives are required which, owing to the installation situation, need to be as short as possible, there is a practice-oriented solution that is especially suitable for applications in robotics, prosthetic joints, laboratory automation, pumps, medical technology or aircraft cabin equipment.

01  '20
Written on
IDS Imaging Development Systems GmbH

Adjust with light

A camera-supported alignment and measuring system ensures precise, fast measurement of straightness and flatness in mechanical engineering

11  '20
Written on
Rohde & Schwarz

Rohde & Schwarz presents its signaling test solutions for 5G NR in FR1 and FR2

Testing 5G NR products requires new T&M approaches, as devices will use a much higher bandwidth, and active antennas make over-the-air (OTA) measurements compulsory. To successfully fulfil and surpass these complex requirements, Rohde & Schwarz has created an innovative portfolio for 5G NR device test solutions. For developers of 5G devices, Rohde & Schwarz features the R&S CMX500 radio communication tester enabling non-standalone (NSA) and standalone (SA) signaling tests now in both FR1 and FR2 frequency ranges.

03  '20
Written on
Rohde & Schwarz

First automated EMC test system for both 5G frequency ranges comes from Rohde & Schwarz

Rohde & Schwarz presents the first turnkey solution for measuring radiated spurious emissions from 5G components in both frequency ranges FR1 and FR2. For this solution the R&S ELEKTRA EMC test software has been upgraded with measurement and calibration routines for 5G.

11  '20
Written on
Rohde & Schwarz

Rohde & Schwarz presents comprehensive IEEE 802.11ax compliant WLAN signaling test solution

Rohde & Schwarz offers a broad range of WLAN signaling test solutions in line with IEEE 802.11ax. Access points and WLAN stations can now be tested in single input single output (SISO) and multiple input multiple output (MIMO) mode as well as in single-user or multi-user (OFDMA) operation, even under fading conditions and during IP data application.

18  '19
Written on
FAULHABER GROUP

E-Motion on the bike

It goes without saying that the bicycle is a part of locomotion culture in Germany. 97 percent of people in Germany can ride a bike. They use bicycles not only for bike tours in their free time but also on a daily basis for shopping or commuting to work. Due to rising petrol costs and the constantly congested roads at peak times, residents of large cities in particular see the bicycle as a true alternative to the automobile. FAULHABER drives are installed here in various components.

11  '19
Written on
FAULHABER GROUP

GPS for the milky way

What is going on in the neighbourhood? We all want to know, whether we admit it or not. Applied to the whole of humanity and Earth, the question is: What is going on in the Milky Way? We know surprisingly little about this, because we literally have a hard time seeing the wood for the trees. But the MOONS project initiated by British astronomers aims to change this. Technology from FAULHABER will play an important role.

Join the 155,000+ IMP followers

International