Musculoskeletal disorders are a common occupational disease in the EU and North America and are one of the most common causes for long- term absence from work. Work-related upper-limb disorders annually cost 2.1 billion eurosacross the EU and are responsible for 45% of all occupational diseases. Wearables, clothing enhanced through technology, offer an approach for reducing these injuries. Ironhand® from the Swedish company BIOSERVO TECHNOLOGIES is a soft robotic glove that strengthens the human grip with help of the company’s patented SEM™ technology. The gripping force support of the individual fingers is made possible with FAULHABER drives.
Always more, always faster, always further everything needs to arrive at the right time at the right place – the global goods cycle keeps the economy running and is a challenge for everyone involved. This only functions through the use of extensive automation within the logistics chain, which would be unthinkable without an armada of high-performance micromotors. These motors often need to generate considerable forces under extremely confined conditions and, above all, must always work reliably in continuous operation. This is why drives from FAULHABER can frequently be found in these challenging applications.
Drive Systems evolved. Generally speaking, electric motors are not "lone wolves" but for most applications need to be combined with gearheads for speed reduction as well as encoders. To ensure that the components are perfectly matched to each other and to minimise installation requirements, it is recommended to obtain the individual components as a complete solution from a single source. Even in cases where installation space is extremely tight and where high-torque drives are required which, owing to the installation situation, need to be as short as possible, there is a practice-oriented solution that is especially suitable for applications in robotics, prosthetic joints, laboratory automation, pumps, medical technology or aircraft cabin equipment.
Testing 5G NR products requires new T&M approaches, as devices will use a much higher bandwidth, and active antennas make over-the-air (OTA) measurements compulsory. To successfully fulfil and surpass these complex requirements, Rohde & Schwarz has created an innovative portfolio for 5G NR device test solutions. For developers of 5G devices, Rohde & Schwarz features the R&S CMX500 radio communication tester enabling non-standalone (NSA) and standalone (SA) signaling tests now in both FR1 and FR2 frequency ranges.
Rohde & Schwarz presents the first turnkey solution for measuring radiated spurious emissions from 5G components in both frequency ranges FR1 and FR2. For this solution the R&S ELEKTRA EMC test software has been upgraded with measurement and calibration routines for 5G.
Rohde & Schwarz offers a broad range of WLAN signaling test solutions in line with IEEE 802.11ax. Access points and WLAN stations can now be tested in single input single output (SISO) and multiple input multiple output (MIMO) mode as well as in single-user or multi-user (OFDMA) operation, even under fading conditions and during IP data application.